Transducers & sensors
Product category: Rotary encoders
Incremental or absolute: Absolute
Interface: PROFIBUS
Single or Multiturn: Singleturn
Construction: 58 mm, 64 mm, 65 mm, 66 mm, 90 mm, 105 mm, 125 mm.
Housing material: Stainless Steel 1.4305, Stainless Steel 1.4404
Flange and shaft: Cam switching flange, shaft for ZRS, Clamped flange, shaft 10 mm with disk spring, Clamped flange, shaft 10 mm with spring key,
Clamped flange, shaft 10 mm with flat face, Clamped flange, shaft for
Measuring equipment ZRS, Mounting flange, shaft 12 mm,
Mounting flange, shaft 12 mm with spring key, Special,
Synchronizing flange, shaft 6 mm, synchronizing flange, clamped shaft,
12 mm inner diameter, synchronizing flange, clamped shaft, 12 mm
Inner diameter, Synchronizing flange, shaft 6 mm with flat area,
Synchro flange, shaft 12 mm, Synchro flange, shaft 12 mm with spring key
Resolution: 4096 steps / 360° <) or steps / drum circle (248 mm) with
draw wire version, 8194 steps / 360° <) or steps / drum circle (248 mm) with draw wire version.
Code type: Binary
Measuring range: 10 measuring lengths in meters for the traction wire version, Possible values: 6 and 10, 4096 revolutions.
Profile: Class 2 according to code profile No 3.062
Connection cover: Connection cover
Electrical / mechanical variant: Compatible with rotary encoders model KRD, Standard
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Rotary encoder TBD
Registration of the angular position and revolutions using Hall sensors – multiturn version with absolute transmission for up to 4096 revolutions – data output plus parameterization and diagnosis via Profibus-DP. Robust housing made of seawater-proof aluminum or stainless steel – stainless steel shaft – ball bearings with radial shaft seals – sensor circuit consisting of ASIC with Hall element – electrical connections via connector sleeve with threaded cable connections. The absolute encoders are designed for direct connection to PROFIBUS-DP. The interface is implemented with SPC3 Siemens PROFIBUS controller. The protocol corresponds to DP-Slave Class 2 functionality according to the Profibus profile for encoders, No. 3.062, and is described in detail in the TRD 12770 user manual. The TRD is mechanically and electrically compatible with the CRD electro-optical encoder.