Rotating transducer THBA single-turn

Rotary encoder THBA The angle converters have a magnetic scan according to the HALL principle. Due to the robust design, critical and interference-free applications in difficult environments can be realized. They have a robust housing (wall thickness > 5 mm) of aluminum or stainless steel, stainless steel shaft and ball bearings, shaft with flange, rotor with shaft and permanent magnet mounted in pre-chamber, sensor circuit consisting of ASIC with Hall element and interface electronics housed in closed main chamber. Two models are available: for low and high temperature applications. The low temperature use model is equipped with a special grease for bearings and shaft seals. Seals and shaft seal are made of PTFE. Cable gland with clamping screw and silicone sealant. The high temperature model is without a shaft seal. Under the tailgate is a signal path switch (CW/CCW). On the side there is a preset button (4 mA) located under a screw plug. Electrical connection via M12 connector or special cable.