Transducers & sensors
“Product category: Rotary encoders
Incremental or absolute: Absolute
Interface: PROFIBUS
Single or Multiturn: Multiturn
Construction: 58 mm, 64 mm, 65 mm, 66 mm, 90 mm, 105 mm, 125 mm.
Housing material: Aluminum, Stainless Steel 1.4305, Stainless Steel 1.4404
Flange and shaft: Cam switching flange, shaft for ZRS, Clamped flange, shaft 10 mm with disk spring, Clamped flange, shaft 10 mm with spring key,
Clamped flange, shaft 10 mm with flat surface, Clamped flange, shaft for measuring equipment ZRS, Mounting flange, shaft 12 mm,
Mounting flange, shaft 12 mm with spring key, Special version
(see data sheet), Synchronizer flange, shaft 6 mm, Synchronizer flange, clamped shaft, 12 mm inner diameter, Synchronizer flange, shaft 6 mm with flattened area, Synchronizer flange, shaft 12 mm,
Synchronizing flange, shaft 12 mm with spring key.
Resolution: 4096 steps / 360° <) or steps / drum circumference (248 mm) with wire rope version.
Code type: Binary
Measuring range: 10 measuring lengths in meters for the traction wire version. Possible values: 6 and 10, 4096 turns
Profile: Class 2 according to code profile No 3.062
Connection protection: Connection protection
Electrical / mechanical variant: Compatible with rotary encoders model KRD, Standard
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Rotary encoder TRD Recording of the angular position and revolutions from Hall sensors -.
multiturn version with absolute transfer for up to 10 years.
4096 revolutions – data output plus parameterization and
diagnosis via Profibus-DP. Robust housing made of
seawater-proof aluminum or stainless steel – stainless steel
steel shaft – ball bearings with radial shaft seals – sensor circuit consisting of ASIC with Hall element – electrical connections via connecting sleeve with threaded cable connections. The absolute encoders are designed for direct connection to PROFIBUS-DP. The interface is implemented with SPC3 Siemens PROFIBUS controller. The protocol corresponds to DP-Slave Class 2 functionality according to the Profibus profile for encoders, No. 3.062, and is described in detail in the TRD 12770 user manual. The TRD is mechanically and electrically compatible with the CRD electro-optical encoder.