Transducers & sensors
Product category: Rotary encoders
Incremental or absolute: Absolute
Single or Multiturn: Singleturn
Interface: Analog
Design: 50 mm, 58 mm
Special function: Low and high temperature
Flange and shaft: Clamping flange, Synchronizing flange
Housing material: Aluminum, Stainless Steel
Measurement range: 360° <)
Signal path: CCW, CW
Electrical connection: Cable 1 m, connection (high temperature only)
Output signal: 0 to 20 mA, 4 to 20 mA
Electric / mechanical variant: Basic version
Rotary encoder TTBA
The angular transducers have a magnetic scan according to
The HALL principle. Due to the robust design, critical and interference-free applications in difficult environments can be realized. They have a robust housing (wall thickness > 5 mm) of aluminum or stainless steel, stainless steel shaft and ball bearings, shaft with flange, rotor with shaft and permanent magnet mounted in pre-chamber, sensor circuit consisting of ASIC with Hall element and interface electronics housed in closed main chamber. Two models are available: for low and high temperature applications. The low temperature use model is equipped with a special grease for bearings and shaft seals. Seals and shaft seal are made of PTFE. Cable gland with clamping screw and silicone sealant. The model for high temperature use is without a shaft seal. Under the tailgate is a signal switch (CW/CCW). On the side there is a preset button (4 mA) placed under a
screw plug. Electrical connection via M12 connector or special cable.