Transducers & sensors
Interfaces: CANopen, Relay
Single or multiturn: Multiturn
Construction: 58 mm, 64 mm, 65 mm, 66 mm, 79 mm, 120 mm.
Flange and shaft: Clamped flange, clamped shaft 12 mm inner diameter with groove, Clamped flange,
shaft 10 mm with spring key, clamped flange, shaft 10 mm with flat surface,
Clamped flange, shaft 12 mm for measuring equipment ZRS, Clamped flange,
shaft 12 mm with spring key, clamped flange, shaft 12 mm with flat surface,
Clamping flange, clamping shaft 12 mm inner diameter, Mounting flange, shaft 12 mm
with flat surface, Synchronizing flange, clamped shaft, 12 mm inner diameter,
Synchronizing flange, clamped shaft, 12 mm inner diameter with groove,
Synchronizing flange, shaft 6 mm with flattened surface, Synchronizing flange,
shaft 12 mm, Synchronizing flange, shaft 12 mm with spring key
Number of switching outputs: 2 switching outputs, max 4, max. 6 with NOCN79 (relay / PhotoMOS)
Housing material: Aluminum, Stainless Steel 1.4305, Stainless Steel 1.4404
Resolution: 4096 = 12-bit, maximum 13-bit (= 8192)
Code type: Binary
Measuring range: 16 turns, 256 turns, 4096 turns
Profile: CANopen according to CIA, DS 406 revision 4.0.1
Electrical connection: 1 connection, 2 connections, 3 connections, device connection M12, radial, Via cable 1 m, axial (with only NOCN79 on request),
Via cable 1 m, radial (other lengths on request), Via device connection
M12, axial (with NOCN79 only on request)
Galvanic separation: -UB = CAN_GND = screen / housing, -UB = CAN_GND ND screen / housing, -UB
ǂ CAN_GND ǂ screen / housing (recommended)
Electrical / mechanical variant: Standard
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
Transducers & sensors
“Switching cam encoder NOCN NOCN is a game-free electronic switching cam encoder
with a maximum of four galvanically separated
switching outputs (cams), which can be set by the customer and which are activated or deactivated depending on the current position of the drive shaft. A parameterizable multi-opening absolute encoder with CANopen interface plus switching cam encoder, printed circuit board with separate controllers is integrated in the compact housing. The CANopen position signal of the encoder and the switching outputs can be parameterized separately. Parameterization is performed via the relevant CANopen object in accordance with the encoder profile according to CiA, DS 406, revision 4.01. The NOCN has a fault monitoring system that outputs an error message via the CANopen bus (emergency message) when a fault is detected.